The file_operations structure is defined in linux/fs.h, and holds pointers to functions defined by the driver that perform various operations on the device. Each field of the structure corresponds to the address of some function defined by the driver to handle a requested operation.
For example, every character driver needs to define a function that reads from the device. The file_operations structure holds the address of the module's function that performs that operation. Here is what the definition looks like for kernel 2.4.2:
struct file_operations {
struct module *owner;
loff_t (*llseek) (struct file *, loff_t, int);
ssize_t (*read) (struct file *, char *, size_t, loff_t *);
ssize_t (*write) (struct file *, const char *, size_t, loff_t *);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
int (*fsync) (struct file *, struct dentry *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,
loff_t *);
ssize_t (*writev) (struct file *, const struct iovec *, unsigned long,
loff_t *);
};
|
Some operations are not implemented by a driver. For example, a driver that handles a video card won't need to read from a directory structure. The corresponding entries in the file_operations structure should be set to NULL.
There is a gcc extension that makes assigning to this structure more convenient. You'll see it in modern drivers, and may catch you by surprise. This is what the new way of assigning to the structure looks like:
struct file_operations fops = {
read: device_read,
write: device_write,
open: device_open,
release: device_release
};
|
However, there's also a C99 way of assigning to elements of a structure, and this is definitely preferred over using the GNU extension. The version of gcc I'm currently using, 2.95, supports the new C99 syntax. You should use this syntax in case someone wants to port your driver. It will help with compatibility:
struct file_operations fops = {
.read = device_read,
.write = device_write,
.open = device_open,
.release = device_release
};
|
The meaning is clear, and you should be aware that any member of the structure which you don't explicitly assign will be initialized to NULL by gcc.
A pointer to a struct file_operations is commonly named fops.
Each device is represented in the kernel by a file structure, which is defined in linux/fs.h. Be aware that a file is a kernel level structure and never appears in a user space program. It's not the same thing as a FILE, which is defined by glibc and would never appear in a kernel space function. Also, its name is a bit misleading; it represents an abstract open `file', not a file on a disk, which is represented by a structure named inode.
A pointer to a struct file is commonly named filp. You'll also see it refered to as struct file file. Resist the temptation.
Go ahead and look at the definition of file. Most of the entries you see, like struct dentry aren't used by device drivers, and you can ignore them. This is because drivers don't fill file directly; they only use structures contained in file which are created elsewhere.
As discussed earlier, char devices are accessed through device files, usually located in /dev[1]. The major number tells you which driver handles which device file. The minor number is used only by the driver itself to differentiate which device it's operating on, just in case the driver handles more than one device.
Adding a driver to your system means registering it with the kernel. This is synonymous with assigning it a major number during the module's initialization. You do this by using the register_chrdev function, defined by linux/fs.h.
int register_chrdev(unsigned int major, const char *name,
struct file_operations *fops);
|
where unsigned int major is the major number you want to request, const char *name is the name of the device as it'll appear in /proc/devices and struct file_operations *fops is a pointer to the file_operations table for your driver. A negative return value means the registertration failed. Note that we didn't pass the minor number to register_chrdev. That's because the kernel doesn't care about the minor number; only our driver uses it.
Now the question is, how do you get a major number without hijacking one that's already in use? The easiest way would be to look through Documentation/devices.txt and pick an unused one. That's a bad way of doing things because you'll never be sure if the number you picked will be assigned later. The answer is that you can ask the kernel to assign you a dynamic major number.
If you pass a major number of 0 to register_chrdev, the return value will be the dynamically allocated major number. The downside is that you can't make a device file in advance, since you don't know what the major number will be. There are a couple of ways to do this. First, the driver itself can print the newly assigned number and we can make the device file by hand. Second, the newly registered device will have an entry in /proc/devices, and we can either make the device file by hand or write a shell script to read the file in and make the device file. The third method is we can have our driver make the the device file using the mknod system call after a successful registration and rm during the call to cleanup_module.
We can't allow the kernel module to be rmmod'ed whenever root feels like it. If the device file is opened by a process and then we remove the kernel module, using the file would cause a call to the memory location where the appropriate function (read/write) used to be. If we're lucky, no other code was loaded there, and we'll get an ugly error message. If we're unlucky, another kernel module was loaded into the same location, which means a jump into the middle of another function within the kernel. The results of this would be impossible to predict, but they can't be very positive.
Normally, when you don't want to allow something, you return an error code (a negative number) from the function which is supposed to do it. With cleanup_module that's impossible because it's a void function. However, there's a counter which keeps track of how many processes are using your module. You can see what it's value is by looking at the 3rd field of /proc/modules. If this number isn't zero, rmmod will fail. Note that you don't have to check the counter from within cleanup_module because the check will be performed for you by the system call sys_delete_module, defined in linux/module.c. You shouldn't use this counter directly, but there are macros defined in linux/modules.h which let you increase, decrease and display this counter:
MOD_INC_USE_COUNT: Increment the use count.
MOD_DEC_USE_COUNT: Decrement the use count.
MOD_IN_USE: Display the use count.
It's important to keep the counter accurate; if you ever do lose track of the correct usage count, you'll never be able to unload the module; it's now reboot time, boys and girls. This is bound to happen to you sooner or later during a module's development.
The next code sample creates a char driver named chardev. You can cat its device file (or open the file with a program) and the driver will put the number of times the device file has been read from into the file. We don't support writing to the file (like echo "hi" > /dev/hello), but catch these attempts and tell the user that the operation isn't supported. Don't worry if you don't see what we do with the data we read into the buffer; we don't do much with it. We simply read in the data and print a message acknowledging that we received it.
Example 4-1. chardev.c
/* chardev.c: Creates a read-only char device that says how many times
* you've read from the dev file
*
* Copyright (C) 2001 by Peter Jay Salzman
*
* 08/02/2006 - Updated by Rodrigo Rubira Branco <rodrigo@kernelhacking.com>
*/
/* Kernel Programming */
#define MODULE
#define LINUX
#define __KERNEL__
#if defined(CONFIG_MODVERSIONS) && ! defined(MODVERSIONS)
#include <linux/modversions.h>
#define MODVERSIONS
#endif
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <asm/uaccess.h> /* for put_user */
#include <asm/errno.h>
/* Prototypes - this would normally go in a .h file */
int init_module(void);
void cleanup_module(void);
static int device_open(struct inode *, struct file *);
static int device_release(struct inode *, struct file *);
static ssize_t device_read(struct file *, char *, size_t, loff_t *);
static ssize_t device_write(struct file *, const char *, size_t, loff_t *);
#define SUCCESS 0
#define DEVICE_NAME "chardev" /* Dev name as it appears in /proc/devices */
#define BUF_LEN 80 /* Max length of the message from the device */
/* Global variables are declared as static, so are global within the file. */
static int Major; /* Major number assigned to our device driver */
static int Device_Open = 0; /* Is device open? Used to prevent multiple
access to the device */
static char msg[BUF_LEN]; /* The msg the device will give when asked */
static char *msg_Ptr;
static struct file_operations fops = {
.read = device_read,
.write = device_write,
.open = device_open,
.release = device_release
};
/* Functions */
int init_module(void)
{
Major = register_chrdev(0, DEVICE_NAME, &fops);
if (Major < 0) {
printk ("Registering the character device failed with %d\n", Major);
return Major;
}
printk("<1>I was assigned major number %d. To talk to\n", Major);
printk("<1>the driver, create a dev file with\n");
printk("'mknod /dev/hello c %d 0'.\n", Major);
printk("<1>Try various minor numbers. Try to cat and echo to\n");
printk("the device file.\n");
printk("<1>Remove the device file and module when done.\n");
return 0;
}
void cleanup_module(void)
{
/* Unregister the device */
int ret = unregister_chrdev(Major, DEVICE_NAME);
if (ret < 0) printk("Error in unregister_chrdev: %d\n", ret);
}
/* Methods */
/* Called when a process tries to open the device file, like
* "cat /dev/mycharfile"
*/
static int device_open(struct inode *inode, struct file *file)
{
static int counter = 0;
if (Device_Open) return -EBUSY;
Device_Open++;
sprintf(msg,"I already told you %d times Hello world!\n", counter++);
msg_Ptr = msg;
MOD_INC_USE_COUNT;
return SUCCESS;
}
/* Called when a process closes the device file */
static int device_release(struct inode *inode, struct file *file)
{
Device_Open --; /* We're now ready for our next caller */
/* Decrement the usage count, or else once you opened the file, you'll
never get get rid of the module. */
MOD_DEC_USE_COUNT;
return 0;
}
/* Called when a process, which already opened the dev file, attempts to
read from it.
*/
static ssize_t device_read(struct file *filp,
char *buffer, /* The buffer to fill with data */
size_t length, /* The length of the buffer */
loff_t *offset) /* Our offset in the file */
{
/* Number of bytes actually written to the buffer */
int bytes_read = 0;
/* If we're at the end of the message, return 0 signifying end of file */
if (*msg_Ptr == 0) return 0;
/* Actually put the data into the buffer */
while (length && *msg_Ptr) {
/* The buffer is in the user data segment, not the kernel segment;
* assignment won't work. We have to use put_user which copies data from
* the kernel data segment to the user data segment. */
put_user(*(msg_Ptr++), buffer++);
length--;
bytes_read++;
}
/* Most read functions return the number of bytes put into the buffer */
return bytes_read;
}
/* Called when a process writes to dev file: echo "hi" > /dev/hello */
static ssize_t device_write(struct file *filp,
const char *buff,
size_t len,
loff_t *off)
{
printk ("<1>Sorry, this operation isn't supported.\n");
return -EINVAL;
}
MODULE_LICENSE("GPL"); |
The system calls, which are the major interface the kernel shows to the processes, generally stay the same across versions. A new system call may be added, but usually the old ones will behave exactly like they used to. This is necessary for backward compatibility -- a new kernel version is not supposed to break regular processes. In most cases, the device files will also remain the same. On the other hand, the internal interfaces within the kernel can and do change between versions.
The Linux kernel versions are divided between the stable versions (n.$<$even number$>$.m) and the development versions (n.$<$odd number$>$.m). The development versions include all the cool new ideas, including those which will be considered a mistake, or reimplemented, in the next version. As a result, you can't trust the interface to remain the same in those versions (which is why I don't bother to support them in this book, it's too much work and it would become dated too quickly). In the stable versions, on the other hand, we can expect the interface to remain the same regardless of the bug fix version (the m number).
There are differences between different kernel versions, and if you want to support multiple kernel versions, you'll find yourself having to code conditional compilation directives. The way to do this to compare the macro LINUX_VERSION_CODE to the macro KERNEL_VERSION. In version a.b.c of the kernel, the value of this macro would be $2^{16}a+2^{8}b+c$. Be aware that this macro is not defined for kernel 2.0.35 and earlier, so if you want to write modules that support really old kernels, you'll have to define it yourself, like:
Example 4-2. some title
#if LINUX_KERNEL_VERSION >= KERNEL_VERSION(2,2,0)
#define KERNEL_VERSION(a,b,c) ((a)*65536+(b)*256+(c))
#endif |
Of course since these are macros, you can also use #ifndef KERNEL_VERSION to test the existence of the macro, rather than testing the version of the kernel.
| [1] | This is by convention. When writing a driver, it's OK to put the device file in your current directory. Just make sure you place it in /dev for a production driver |