Upgrading to 3.4
****************

Note:

  This guide assumes that you are familiar and comfortable with
  administration of a Cyrus installation, and system administration in
  general.It assumes you are installing from source or tarball. If you
  want to install from package, use the upgrade instructions from the
  package provider.


Upgrading: an overview
^^^^^^^^^^^^^^^^^^^^^^

* 1. Preparation

  * Installation from tarball

  * How are you planning on upgrading?

    * Upgrade by replicating

    * Upgrade in place

  * Do What As Who?

* 2. Install new 3.4 Cyrus

* 3. Shut down existing Cyrus

* 4. Backup and Copy existing data

* 5. Copy config files and update

* 6. Upgrade specific items

* 7. Start new 3.4 Cyrus and verify

* 8. Reconstruct databases and cache

* 9. Do you want any new features?

* 10. Upgrade complete

* Special note for Murder configurations

Note:

  For those upgrading from 2.3.X; newer releases of Cyrus IMAP will
  use significantly more memory per selected mailbox.  This is not an
  error or bug; it's a feature.  The newer code is holding more data
  and metadata in memory for purposes of faster access to more of the
  mailbox.  This is not a memory leak.


1. Preparation
==============

Things to consider **before** you begin:


Installation from tarball
-------------------------

You will need to install from our packaged tarball. We provide a full
list of libraries that Debian requires, but we aren't able to test all
platforms: you may find you need to install additional or different
libraries to support v3.4.


How are you planning on upgrading?
----------------------------------

Ideally, you will do a sandboxed test installation of 3.4 using a
snapshot of your existing data before you switch off your existing
installation. The rest of the instructions are assuming a sandboxed
3.4 installation.


Upgrade by replicating
~~~~~~~~~~~~~~~~~~~~~~

If you're familiar with replication, and your current installation is
2.4 or newer, you can set up your existing installation to replicate
data to a new 3.4 installation and failover to the new installation
when you're ready. The replication protocol has been kept backwards
compatible.

If your old installation contains mailboxes or messages that are older
than 2.4, they may not have GUID fields in their indexes (index
version too old), or they may have their GUID field set to zero.  3.4
will not accept message replications without valid matching GUIDs, so
you need to fix this on your old installation first.

You can check for affected mailboxes by examining the output from the
mbexamine(8) tool:

* mailboxes that report a 'Minor Version:' less than 10 will need to
  have their index upgraded using reconstruct(8) with the *-V
  <version>* parameter to be at least 10.

* mailboxes containing messages that report 'GUID:0' will need to have
  their GUIDs recalculated using reconstruct(8) with the *-G*
  parameter.

If you have a large amount of data, these reconstructs will take a
long time, so it's better to identify the mailboxes needing attention
and target them specifically.  But if you have a small amount of data,
it might be less work to just *reconstruct -G -V max* everything.


Upgrade in place
~~~~~~~~~~~~~~~~

If you are upgrading in place, you will need to shut down Cyrus
entirely while you install the new package.  If your old installation
was using Berkeley DB format databases, you will need to convert or
upgrade the databases **before** you upgrade.  Cyrus v3.4 does not
support Berkeley DB at all.

Note:

  If you are upgrading from Cyrus version 2.5 or earlier, and your
  system is configured with the following combination in
  imapd.conf(5):

     fulldirhash: yes
     hashimapspool: either yes or no
     unixhierarchysep: yes

  then you will not be able to upgrade-in-place.  This is due to a
  change in how directory hashes are calculated for users whose
  localpart contains a dot, which was introduced in 3.0.0.  After an
  in-place upgrade, Cyrus will not be able to find these users'
  metadata and/or mailboxes.If you have this configuration, you will
  need to upgrade by replicating, not in place.


Do What As Who?
---------------

Since the various files, databases, directories, etc. used by Cyrus
must be readable and writable as the "cyrus" user, please make sure to
**always** perform Cyrus commands *as* the "cyrus" user, and not as
"root".  In our documentation, we will always reference Cyrus commands
in this form -- cyr_info(8) -- before using examples of them, so
you'll know that those commands **must** be run as the "cyrus" user.

Doing so in most systems is as simple as using either the "su" or
"sudo" commands, like so:

   su cyrus -c "/usr/local/bin/cyr_info conf-lint -C /etc/imapd.conf -M /etc/cyrus.conf"
   sudo -u cyrus /usr/local/bin/cyr_info conf-lint -C /etc/imapd.conf -M /etc/cyrus.conf

In this document, however, there are also several command examples
which *should* or **must** be run as "root".  These are always
standard *nix commands, such as "rsync" or "scp".

We strongly recommend that you read this entire document before
upgrading.


2. Install new 3.4 Cyrus
========================

Download the release 3.4 package tarball.

Fetch the libraries for your platform. The full list (including all
optional packages) for Debian is:

   sudo apt-get install -y autoconf automake autotools-dev bash-completion bison build-essential comerr-dev \
   debhelper flex g++ git gperf groff heimdal-dev libbsd-resource-perl libclone-perl libconfig-inifiles-perl \
   libcunit1-dev libdatetime-perl libdb-dev libdigest-sha-perl libencode-imaputf7-perl libfile-chdir-perl \
   libglib2.0-dev libical-dev libio-socket-inet6-perl libio-stringy-perl libjansson-dev libldap2-dev \
   libmysqlclient-dev libnet-server-perl libnews-nntpclient-perl libpam0g-dev libpcre2-dev libsasl2-dev \
   libsqlite3-dev libssl-dev libtest-unit-perl libtool libunix-syslog-perl liburi-perl \
   libxapian-dev libxml-generator-perl libxml-xpath-perl libxml2-dev libwrap0-dev libzephyr-dev lsb-base \
   net-tools perl php-cli php-curl pkg-config po-debconf tcl-dev \
   transfig uuid-dev vim wamerican wget xutils-dev zlib1g-dev sasl2-bin rsyslog sudo acl telnet

If you're on another platform and can provide the list of
dependencies, please let us know via a GitHub issue or documentation
pull request, or send mail to the developer list.

Follow the general install instructions.

Note:

  It's best to ensure your new Cyrus *will not* start up automatically
  if your server restarts in the middle of the upgrade.How this is
  best achieved will depend upon your OS and distro, but may involve
  something like "systemctl disable cyrus-imapd" or "update-rc.d
  cyrus-imapd disable"


3. Shut down existing Cyrus
===========================

Shut down your existing Cyrus installation with its init script or
whatever method you normally use.

This is necessary to guarantee a clean data snapshot.


4. Backup and Copy existing data
================================

We recommend backing up all your data before continuing.

* Sieve scripts

* Config files

* Mail spool

* Cyrus Databases

(You do already have a backup strategy in place, right? Once you're on
3.4, you can consider using the experimental backup tools.)

Copy all of this to the new instance, using "rsync" or similar tools.

Note:

  Cyrus keeps its data and databases in various locations, some of
  which may be tailored by your configuration.  Please consult File &
  Directory Locations for guidance on where data lives in your current
  installation.

For example, to copy from an existing Debian or Ubuntu installation
using their standard locations, you might execute this series of
commands on the *new* server (where "oldimap" is the name of the old
server):

   rsync -aHv oldimap:/var/lib/cyrus/. /var/lib/cyrus/.
   rsync -aHv oldimap:/var/spool/cyrus/. /var/spool/cyrus/.

You don't need to copy the following databases as Cyrus 3.4 will
recreate these for you automatically:

* duplicate delivery (deliver.db),

* TLS cache (tls_sessions.db),

* PTS cache (ptscache.db),

* STATUS cache (statuscache.db).

Note:

  You may wish to consider relocating these four databases to
  ephemeral storage, such as "/run/cyrus" (Debian/Ubuntu) or
  "/var/run/cyrus" or whatever suitable tmpfs is provided on your
  distro.  It will place less IO load on your disks and run faster.


5. Copy config files and update
===============================

Again, check the locations on your specific installation.  For
example, on FreeBSD systems, the configuration files imapd.conf(5) and
cyrus.conf(5) are in "/usr/local/etc", rather than "/etc/".  Run this
command on the *old* server:

   scp /etc/cyrus.conf /etc/imapd.conf newimap:/etc/

Using the cyr_info(8) command, check to see if your imapd.conf file
contains any deprecated options. Run this command on the new server:

   cyr_info conf-lint -C <path to imapd.conf> -M <path to cyrus.conf>

You need to provide both imapd.conf and cyrus.conf so that conf-lint
knows the names of all your services and can check service-specific
overrides.

To check your entire system's configuration you can use the conf-all
action. This command takes all the system defaults, along with
anything you have provided overrides for in your config files:

   cyr_info conf-all -C <path to imapd.conf> -M <path to cyrus.conf>

**Important config** options: "unixhierarchysep:" and "altnamespace:"
defaults in imapd.conf(5) changed in 3.0, which will affect you if you
are upgrading to 3.4 from something earlier than 3.0. Implications are
outlined in the Note in User Namespace Mode and Switching the
Alternative Namespace.  Please also see "Sieve Scripts," below.

* unixhierarchysep: on

* altnamespace: on

In cyrus.conf(5) move idled from the START section to the DAEMON
section.


6. Upgrade specific items
=========================

* Special-Use flags

     If your 2.4 imapd.conf(5) made use of the "xlist-XX"
     directive(s), you can convert these to per-user special-use
     annotations in your new install with the cvt_xlist_specialuse(8)
     tool

Warning:

  **Berkeley db format no longer supported since 3.0**If you have any
  databases using Berkeley db, they'll need to be converted to
  skiplist or flat *in your existing installation*. And then
  optionally converted to whatever final format you'd like in your 3.4
  installation.Databases potentially affected: mailboxes, annotations,
  conversations, quotas.On old install, prior to migration:

     cvt_cyrusdb /<configdirectory>mailboxes.db berkeley /tmp/new-mailboxes.db skiplist

  If you don't want to use flat or skiplist for 3.4, you can use
  cvt_cyrusdb(8) to swap to new format:

     cvt_cyrusdb /tmp/new-mailboxes.db skiplist /<configdirectory>/mailboxes.db <new file format>

Note:

  The cvt_cyrusdb(8) command does not accept relative paths.


7. Start new 3.4 Cyrus and verify
=================================

   sudo ./master/master -d

Check "/var/log/syslog" for errors so you can quickly understand
potential problems.

When you're satisfied version 3.4 is running and can see all its data
correctly, start the new Cyrus up with your regular init script.

If something has gone wrong, contact us on the mailing list. You can
revert to backups and keep processing mail using your old version
until you're able to finish your 3.4 installation.

Note:

  If you've disable your system startup scripts, as recommended in
  step 2, remember to re-enable them.  Use something like "systemctl
  enable cyrus-imapd" or "update-rc.d cyrus-imapd enable"


8. Reconstruct databases and cache
==================================

The following steps can each take a long time, so we recommend running
them one at a time (to reduce locking contention and high I/O load).

To upgrade all the mailboxes to the latest version. This will take
hours, possibly days.

   reconstruct -V max

New configuration: if turning on conversations, you need to create
conversations.db for each user. (This is required for jmap).:

   ctl_conversationsdb -b -r

To check (and correct) quota usage:

   quota -f

If you've been using CalDAV/CardDAV/all of the DAV from earlier
releases, then the user.dav databases need to be reconstructed due to
format changes.:

   dav_reconstruct -a

If you are upgrading from 3.0, and have the *reverseacls* feature
enabled in imapd.conf(5), you may need to regenerate the data it uses
(which is stored in *mailboxes.db*).  This is automatically
regenerated at startup by *ctl_cyrusdb -r* if the *reverseacls*
setting has changed. So, to force a regeneration:

   1. Shut down Cyrus

   2. Change *reverseacls* to *0* in imapd.conf(5)

   3. Run ctl_cyrusdb(8) with the *-r* switch (or just start Cyrus,
      assuming your cyrus.conf(5) contains a *ctl_cyrusdb -r* entry in
      the START section).  The old RACL entries will be removed

   4. (If you started Cyrus, shut it down again)

   5. Change *reverseacls* back to *1*

   6. Start up Cyrus (or run *ctl_cyrusdb -r*).  The RACL entries will
      be rebuilt


9. Do you want any new features?
================================

3.4 comes with many lovely new features. Consider which ones you want
to enable. Check the 3.4 release notes for the full list.


10. Upgrade complete
====================

Your upgrade is complete, congratulations!


Special note for Murder configurations
======================================

If you upgrade murder frontends before you upgrade all the backends,
they may advertise features to clients which the backends don't
support, which will cause the commands to fail when they are proxied
to the backend.

Generally accepted wisdom when upgrading a Murder configuration is to
upgrade all your back end servers first. This can be done one at a
time.

Upgrade your mupdate master and front ends last.

If you are upgrading from 2.4, and wish to use XFER to transfer your
mailboxes to your new 3.4 server, please consider first upgrading your
2.4 setup to version 2.4.19 or later.  Earlier versions of 2.4 do not
correctly recognise the 2.5 and later mailbox versions, and will
downgrade mailboxes (losing metadata) in transit.  2.4.19 and later
versions correctly recognise 2.5 and later servers, and will not
downgrade mailbox versions in transit.
