GNU ELPA - orderless


Completion style for matching regexps in any order
orderless-0.7.tar, 2022-Jan-12, 260 KiB
Omar AntolĂ­n Camarena <>
Browse ELPA's repository
CGit or Gitweb

To install this package, run in Emacs:

M-x package-install RET orderless RET

Full description

1 Overview

This package provides an orderless completion style that divides the pattern into space-separated components, and matches candidates that match all of the components in any order. Each component can match in any one of several ways: literally, as a regexp, as an initialism, in the flex style, or as multiple word prefixes. By default, regexp and literal matches are enabled.

A completion style is a back-end for completion and is used from a front-end that provides a completion UI. Any completion style can be used with the default Emacs completion UI (sometimes called minibuffer tab completion), with the built-in Icomplete package (which is similar to the more well-known Ido Mode), or with some third party minibuffer completion frameworks such as Vertico, Selectrum (in its default configuration), or icomplete-vertical (note there is also a built-in package named icomplete-vertical in the unreleased version 28 of Emacs, which will eventually make the third party icomplete-vertical obsolete —orderless works equally well with both icomplete-vertical packages).

All the completion UIs just mentioned are for minibuffer completion, used when Emacs commands prompt the user in the minibuffer for some input, but there is also completion at point in normal buffers, typically used for identifiers in programming languages. Completion styles can also be used for that purpose by completion at point UIs such as Corfu, Company or the function consult-completion-in-region from Consult.

To use a completion style with any of the above mentioned completion UIs simply add it as an entry in the variables completion-styles and completion-category-overrides (see their documentation). You may also want to modify the completion-category-defaults variable, which serves as a default value for completion-category-overrides: if you want to use orderless exclusively, set both variables to nil.

With a bit of effort, it might still be possible to use orderless with other completion UIs, even if those UIs don't support the standard Emacs completion styles. Currently there is support for Ivy (see below). Also, while Company does support completion styles directly, pressing SPC takes you out of completion, so comfortably using orderless with it takes a bit of configuration (see below).

If you use MELPA, the easiest way to install orderless is via package-install. If you use both MELPA and use-package, you can use:

(use-package orderless
  :ensure t
  :custom (completion-styles '(orderless)))

Alternatively, put orderless.el somewhere on your load-path, and use the following configuration:

(require 'orderless)
(setq completion-styles '(orderless))

Bug reports are highly welcome and appreciated!

2 Customization

2.1 Component matching styles

Each component of a pattern can match in any of several matching styles. A matching style is simply a function from strings to strings that maps a component to a regexp to match against, so it is easy to define new matching styles. The predefined ones are:


the component is treated as a regexp that must match somewhere in the candidate.

If the component is not a valid regexp, it is ignored.


the component is treated as a literal string that must occur in the candidate.

This is just regexp-quote.


the component is a treated as a literal string that must not occur in the candidate.

Note that nothing is highlighted for this matching style. You probably don't want to use this style directly in orderless-matching-styles but with a style dispatcher instead. There is an example in the section on style dispatchers.


the component is split at word endings and each piece must match at a word boundary in the candidate, occurring in that order.

This is similar to the built-in partial-completion completion-style. For example, re-re matches query-replace-regexp, recode-region and magit-remote-list-refs; f-d.t matches final-draft.txt.


each character of the component should appear as the beginning of a word in the candidate, in order.

This maps abc to \<a.*\<b.*\c.


the characters of the component should appear in that order in the candidate, but not necessarily consecutively.

This maps abc to a.*b.*c.

The variable orderless-matching-styles can be set to a list of the desired matching styles to use. By default it enables the literal and regexp styles.

2.1.1 Style dispatchers

For more fine-grained control on which matching styles to use for each component of the input string, you can customize the variable orderless-style-dispatchers.

Style dispatchers are functions which take a component, its index in the list of components (starting from 0), and the total number of components, and are used to determine the matching styles used for that specific component, overriding the default matching styles.

A style dispatcher can either decline to handle the input string or component, or it can return which matching styles to use. It can also, if desired, additionally return a new string to use in place of the given one. Consult the documentation of orderless-dispatch for full details.

As an example, say you wanted the following setup:

  • you normally want components to match as regexps,
  • except for the first component, which should always match as an initialism —this is pretty useful for, say, execute-extended-command (M-x) or describe-function (C-h f),
  • later components ending in ~ should match (the characters other than the final ~) in the flex style, and
  • later components starting with ! should indicate the rest of the component is a literal string not contained in the candidate.

You can achieve this with the following configuration:

(defun flex-if-twiddle (pattern _index _total)
  (when (string-suffix-p "~" pattern)
    `(orderless-flex . ,(substring pattern 0 -1))))

(defun first-initialism (pattern index _total)
  (if (= index 0) 'orderless-initialism))

(defun without-if-bang (pattern _index _total)
   ((equal "!" pattern)
    '(orderless-literal . ""))
   ((string-prefix-p "!" pattern)
    `(orderless-without-literal . ,(substring pattern 1)))))

(setq orderless-matching-styles '(orderless-regexp)
      orderless-style-dispatchers '(first-initialism

2.2 Component separator regexp

The pattern components are space-separated by default: this is controlled by the variable orderless-component-separator, which should be set either to a regexp that matches the desired component separator, or to a function that takes a string and returns the list of components. The default value is a regexp matches a non-empty sequence of spaces. It may be useful to add hyphens or slashes (or both), to match symbols or file paths, respectively.

Even if you want to split on spaces you might want to be able to escape those spaces or to enclose space in double quotes (as in shell argument parsing). For backslash-escaped spaces set orderless-component-separator to the function orderless-escapable-split-on-space; for shell-like double-quotable space, set it to the standard Emacs function split-string-and-unquote.

If you are implementing a command for which you know you want a different separator for the components, bind orderless-component-separator in a let form.

2.3 Defining custom orderless styles

Orderless allows the definition of custom completion styles using the orderless-define-completion-style macro. Any Orderless configuration variable can be adjusted locally for the new style, e.g., orderless-matching-styles.

By default Orderless only enables the regexp and literal matching styles. In the following example an orderless+initialism style is defined, which additionally enables initialism matching. This completion style can then used when matching candidates of the symbol or command completion category.

(orderless-define-completion-style orderless+initialism
  (orderless-matching-styles '(orderless-initialism
(setq completion-category-overrides
      '((command (styles orderless+initialism))
	(symbol (styles orderless+initialism))
	(variable (styles orderless+initialism))))

Note that in order for the orderless+initialism style to kick-in with the above configuration, you'd need to use commands whose metadata indicates that the completion candidates are commands or symbols. In Emacs 28, execute-extended-command has metadata indicating you are selecting a command, but earlier versions of Emacs lack this metadata. Activating marginalia-mode from the Marginalia package provides this metadata automatically for many built-in commands and is recommended if you use the above example configuration, or other similarly fine-grained control of completion styles according to completion category.

2.4 Faces for component matches

The portions of a candidate matching each component get highlighted in one of four faces, orderless-match-face-? where ? is a number from 0 to 3. If the pattern has more than four components, the faces get reused cyclically.

If your completion-styles (or completion-category-overrides for some particular category) has more than one entry, remember than Emacs tries each completion style in turn and uses the first one returning matches. You will only see these particular faces when the orderless completion is the one that ends up being used, of course.

2.5 Pattern compiler

The default mechanism for turning an input string into a list of regexps to match against, configured using orderless-matching-styles, is probably flexible enough for the vast majority of users. The patterns are compiled by the orderless-pattern-compiler. Under special circumstances it may be useful to implement a custom pattern compiler by advising the orderless-pattern-compiler.

2.6 Interactively changing the configuration

You might want to change the separator or the matching style configuration on the fly while matching. There many possible user interfaces for this: you could toggle between two chosen configurations, cycle among several, have a keymap where each key sets a different configurations, have a set of named configurations and be prompted (with completion) for one of them, popup a hydra to choose a configuration, etc. Since there are so many possible UIs and which to use is mostly a matter of taste, orderless does not provide any such commands. But it's easy to write your own!

For example, say you want to use the keybinding C-l to make all components match literally. You could use the following code:

(defun my/match-components-literally ()
  "Components match literally for the rest of the session."
  (setq-local orderless-matching-styles '(orderless-literal)
	      orderless-style-dispatchers nil))

(define-key minibuffer-local-completion-map (kbd "C-l")

Using setq-local to assign to the configuration variables ensures the values are only used for that minibuffer completion session.

3 Integration with other completion UIs

Several excellent completion UIs exist for Emacs in third party packages. They do have a tendency to forsake standard Emacs APIs, so integration with them must be done on a case by case basis.

If you manage to use orderless with a completion UI not listed here, please file an issue or make a pull request so others can benefit from your effort. The functions orderless-filter, orderless-highlight-matches, orderless--highlight and orderless--component-regexps are likely to help with the integration.

3.1 Ivy

To use orderless from Ivy add this to your Ivy configuration:

(setq ivy-re-builders-alist '((t . orderless-ivy-re-builder)))

3.2 Selectrum

Recent versions of Selectrum default to using whatever completion styles you have configured. If you stick with that default configuration you can use orderless just by adding it to completion-styles. Alternatively, you can use this configuration:

(setq selectrum-refine-candidates-function #'orderless-filter)
(setq selectrum-highlight-candidates-function #'orderless-highlight-matches)

If you use the above configuration, only the visible candidates are highlighted, which is a litte more efficient.

3.3 Company

Company comes with a company-capf backend that uses the completion-at-point functions, which in turn use completion styles. This means that the company-capf backend will automatically use orderless, no configuration necessary!

But there are a couple of points of discomfort:

  1. Pressing SPC takes you out of completion, so with the default separator you are limited to one component, which is no fun. To fix this add a separator that is allowed to occur in identifiers, for example, for Emacs Lisp code you could use an ampersand:

    (setq orderless-component-separator "[ &]")
  2. The matching portions of candidates aren't highlighted. That's because company-capf is hard-coded to look for the completions-common-part face, and it only use one face, company-echo-common to highlight candidates.

    So, while you can't get different faces for different components, you can at least get the matches highlighted in the sole available face with this configuration:

    (defun just-one-face (fn &rest args)
      (let ((orderless-match-faces [completions-common-part]))
        (apply fn args)))
    (advice-add 'company-capf--candidates :around #'just-one-face)

    (Aren't dynamically scoped variables and the advice system nifty?)

4 Related packages

4.1 Ivy and Helm

The well-known and hugely powerful completion frameworks Ivy and Helm also provide for matching space-separated component regexps in any order. In Ivy, this is done with the ivy--regex-ignore-order matcher. In Helm, it is the default, called "multi pattern matching".

This package is significantly smaller than either of those because it solely defines a completion style, meant to be used with any completion UI supporting completion styles while both of those provide their own completion UI (and many other cool features!).

It is worth pointing out that Helm does provide its multi pattern matching as a completion style which could be used with default tab completion, Icomplete, Selectrum or other UIs supporting completion styles! (Ivy does not provide a completion style to my knowledge.) So, for example, Icomplete users could, instead of using this package, install Helm and configure Icomplete to use it as follows:

(require 'helm)
(setq completion-styles '(helm))

(Of course, if you install Helm, you might as well use the Helm UI in helm-mode rather than Icomplete.)

4.2 Prescient

The prescient.el library also provides matching of space-separated components in any order and it can be used with either the Selectrum or Ivy completion UIs (it does not offer a completion-style that could be used with Emacs' default completion UI or with Icomplete). The components can be matched literally, as regexps, as initialisms or in the flex style (called "fuzzy" in prescient). In addition to matching, prescient.el also supports sorting of candidates (orderless leaves that up to the candidate source and the completion UI).

4.3 Restricting to current matches in Icicles, Ido and Ivy

An effect equivalent to matching multiple components in any order can be achieved in completion frameworks that provide a way to restrict further matching to the current list of candidates. If you use the keybinding for restriction instead of SPC to separate your components, you get out of order matching!

  • Icicles calls this progressive completion and uses the icicle-apropos-complete-and-narrow command, bound to S-SPC, to do it.
  • Ido has ido-restrict-to-matches and binds it to C-SPC.
  • Ivy has ivy-restrict-to-matches, bound to S-SPC, so you can get the effect of out of order matching without using ivy--regex-ignore-order.